Step Slider

The Step Slider varies the datastream value between the datastream’s min/max values based on the slider’s horizontal position, in increments of the step setting. It is similar in the way a rotary encoder is used to vary an output based on its position.

Datastream

Select or create a datastream of data type integer or double. Widget properties (label, color, etc.) are also changed via the datastream, but only for virtual, enumerable, and location pins, not digital and analog pins.

Widget Controls

The widget has the following controls:

1. Step: Defines the minimum increment of values generated in response to movement of the slider by the user. Note that if the hardware, Blynk.Console widget, or HTTP API changes the datastream value, then that change will be reflected in the slider position.

2. Send on release: Enable to limit updating the assigned datastream value only when the control is released by the user.

How to process widget input on the device

When the control is pressed, value is sent and stored into the Blynk.Cloud. After that it's sent to your device.

Reading the widget value

For example, if Slider widget is set to Datastream with Virtual Pin V1, you can use such code:

BLYNK_WRITE(V1) // this command is listening when something is written to V1
{
  int pinValue = param.asInt(); // assigning incoming value from pin V1 to a variable
  
  if (pinValue == 1){
   // do something when the control is pressed;
  } else if (pinValue == 0) {
   // do something when the control is released;
  }
  
  Serial.print("V1 value is: "); // printing value to serial monitor
  Serial.println(pinValue);
}

Changing the datastream value

You can update the assigned datastream value using the hardware or HTTP API.

Hardware:

Blynk.virtualWrite(vPin, 1);

HTTP API:

https://{server_address}/external/api/update/?token={your 32 char token}&V0=1

https://{server_address}/external/api/batch/update/?token={your 32 char token}&V0=1

Don't put Blynk.virtualWrite()into the void loop() as it can cause a flood of messages and your hardware will be disconnected. Send such updates only when necessary, use flags, or timers.

Sketch: Basic Sketch

Sketch: Set Property

Sketch: VirtualPinWrite

Sketch: VirtualPinRead

Change Widget Properties

You can change certain properties of the Widget from your hardware. For that, use this command:

Blynk.setProperty(vPin, "widgetProperty", "propertyValue"); 

Where:

• vPin is: virtual pin number the widget is assigned to

• widgetProperty: property you want to change

• propertyValue: value of the property you want to change

Don't put Blynk.setProperty()into the void loop() as it can cause a flood of messages and your hardware will be disconnected. Send such updates only when necessary, or use timers.

Properties you can change

You can change the properties step, color, label, isDisabled, isHidden, and page of the widget from your hardware, or via an HTTP API. The color hexadecimal values in the HTTP API URL must include the hash # character urlencoded as %23.

Set a custom step

Blynk.setProperty(V1, "step", "10");

Set a custom step or datastream value increment/decrement.

Set a custom label for the widget

Blynk.setProperty(V1, "label", "Status");

Show/Hide

Blynk.setProperty(V1, "isHidden", true);

Widget will be hidden from dashboard. Design your UI so that it doesn't look weird when there is no widget.

Disable/Enable

Blynk.setProperty(V1, "isDisabled", true);

Widget will be greyed out on UI and users won't be able to tap on it.

Set a color for the widget

Blynk.setProperty(V1, "color", "#73D13D");  // green
Blynk.setProperty(V1, "color", "#ED9D00");  // orange

Change widget properties via HTTPs API

Updates the Datastream Property and all assigned Widgets

GET https://{server_address}/external/api/update/property?token={your 32 char token}&pin={your vPin}&{property}={value}

The endpoint allows you to update the Datastream Property value via GET request. All widgets (both web and mobile) that are assigned to this datastream will inherit this property. The Datastream Property is persistent and will be stored forever until you change it with another value. In order to clear the property you need to clear the device data in device actions menu.

Example: https://blynk.cloud/external/api/update/property?token=GVki9IC70vb3IqvsV0YD3el4y0OpneL1&pin=V1&step=10

https://blynk.cloud/external/api/update/property?token=GVki9IC70vb3IqvsV0YD3el4y0OpneL1&pin=V2&label=My%20Label

https://blynk.cloud/external/api/update/property?token=GVki9IC70vb3IqvsV0YD3el4y0OpneL1&pin=V1&color=%23D3435C

https://blynk.cloud/external/api/update/property?token=GVki9IC70vb3IqvsV0YD3el4y0OpneL1&pin=V1&isDisabled=true

Path Parameters

Name	Type	Description
{server address}*	string	Get from the bottom right of your Blynk console. More information.

Query Parameters

Name	Type	Description
token*	string	Device auth token from Device info
pin*	string	The datastream virtual pin (should start with "v")
{property}	string	The property of the widget you want to update: step, label, color, isDisabled, isHidden
label	string	the text used as widget label
isDisabled	string	true or false
isHidden	string	true or false
color	string	color hexadecimal, must include the hash # character urlencoded as %23
step	string	Set a custom step or datastream value increment/decrement

200 Success

400 Could not find a device token

{"error":{"message":"Invalid token."}}

Sync to the latest known state

You can update your hardware to the latest datastream value from Blynk.Cloud after your hardware went offline, and then came online again. Use Blynk.syncVirtual() to update a single virtual pin, or Blynk.syncAll() to update all virtual pins. See State Syncing for more details.

BLYNK_CONNECTED() { 
  // Called when hardware is connected to Blynk.Cloud  

  // get the latest value for V1
  Blynk.syncVirtual(V1); 

  // Request Blynk server to re-send latest values for all pins
  Blynk.syncAll()
}