This setting makes current Datastream available for Automation. Once enabled, end-users will be able to choose this Datastream when creating Automation scenarios.
1. Turn on the switch to expose this Datastream for Automation
Edit your Template
Switch to Datastream tab
Select and click the Datastream you want to be used in Automations. Modal window will appear
Click + Advanced Settings
Enable Expose to Automation at the bottom of the modal window
Enable Available in Conditions below
2. Choose the Type of Automation
Type defines what kind of Action or Trigger is it and how it will be presented for the user when using Automation
Main Power Switch
Control that turn device ON/OFF. You can have only one Main Power Switch per Product
Controls property that has on/off state. Don't use this property for Main Power Switch
Controls a property within a set range. Min/Max values are taken from Datastream settings. This parameter also requires a step value. Step defines increments between min and max value of the datastream
Controls properties where color can be set. Include Brightness if needed.
Read-only property to use sensor data as a Condition
3. Configure if this Datastream is as a trigger, an action, or both.
Condition: makes this Datastream available as a Condition.
Action: makes this Datastream available as an Action. Some of the Automation Types can be only a condition.